* User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Who's Online

  • Dot Guests: 2
  • Dot Hidden: 0
  • Dot Users: 0

There aren't any users online.

* Board Stats

  • stats Total Members: 145
  • stats Total Posts: 167
  • stats Total Topics: 40
  • stats Total Categories: 2
  • stats Total Boards: 6
  • stats Most Online: 60

* Search


Welcome to Pretend Prusa

Pretend Prusa has been set up to allow users the ability to share their home DIY 3D printer builds.
So from simple cooling upgrades to full-blown rebuilds, please share your experiences here.

This site does not actually sell anything and all the information on here is completely free.



If you would like to purchase an Original Prusa 3D Printer which is without doubt, the best home DIY printer money can buy then please go to https://www.prusa3d.com

CdRsKuLL
April 19, 2019, 12:31:30 AM by CdRsKuLL
Views: 878 | Comments: 0

So.. I've already done a few upgrades to my CR10s but thought wouldn't it be good to turn it into a Prusa :-)

It will be known as the Creality Prusa  .. :-)

The upgrades I've already done are..
Converted it to a 24v system (PSU, Heated bed and element heater)
Changed the board to a MKS Gen L
Installed some TMC2130 Drivers

Infact you can see everything here..

THIS IS NOT THE FINISHED PRINTER... JUST AS IT CURRENLY IS.. . this is a build log after all :-)



BUT.. now I'm up for a new challenge. I would love to turn my CR10s into a Prusa.. well as close to it as possible.

I'm going to order all the bits today but in short this 'should' do everything the Prusa does except for the XYZ calibration. It will be using the Einsy Rambo board with endless stops, filament sensor, Pinda V2 prob, spring steel bed etc.. It will run on modified Prusa software and have the direct drive full metal extruder. :-)

More details will be added soon.. including a shopping list of where I bought all the items.. wish me luck !   Any questions or comments please post below.

Steve
CdRsKuLL
April 19, 2019, 12:13:05 AM by CdRsKuLL
Views: 290 | Comments: 0

Many thanks to the weekly Prusa crew for choosing one of my designs :-)





It's a small world :-)

Check out their weekly prints at https://www.prusa3d.com/weeklyprints/

If you want to print this or BB9 then you can grab the STL's from https://www.myminifactory.com/object/3d-print-80549

Steve
CdRsKuLL
April 18, 2019, 01:31:09 PM by CdRsKuLL
Views: 317 | Comments: 0

Bit of a video showing two in action..

CdRsKuLL
April 18, 2019, 11:30:06 AM by CdRsKuLL
Views: 1401 | Comments: 11

This is a list of parts required to build your own Pretend Prusa...



1. Aluminum frame + front plate + rear plate + Y carriage
2. 3 off U bolts for the bed bearing housing
3. 10 off LM8UU bearings
​4. Smooth rods kit 2 off 320mm + 2 off 330mm + 2 off 370mm
5. Aluminum Profiles kit- 2 off 205MM 3030 + 2 off 120MM 3030
6. 4 off Antivibration Feet
7. 1 off MK52 magnetic heated bed + spring steel bed (textured or PEI)
8. 1 off 30cm sleeve cable for heated bed
9. Motors kit-Nema 17 stepper motor and z axis 320mm motor
10. Einsy board + 1*2004 Reprap Discount LCD screen
11. Filament sensor with cable - Either mk3 or mk3s type
12. Power panic 24v PSU with cable and switch
13. P.I.N.D.A V2 sensor
14. 5v 3 wire 4010 fan (Extruder)
15. 5v 3 wire 5015 fan (Cooling)
16. E3D v6 All metal hotend with 24v heating element and thermistor
17. 50CM Textile Sleeve Cable Wire
18. PTFE Tube cut to 13mm and 50mm (from memory but need to check)
19. BTech drive gear extruder kit
20. 2m gt2 belt with 2* pulley
21. 2off 623h pinion
22. 9off 6mm aluminum spacer for heated bed
​23. Various screw kit
24. PETG for printed parts
25. ABS for cooling part

This list will be continually updated with information
Pages: 1 [2]

Recent Topics

topic Wagster mod with octoprint
[Pretend Prusa Chitchat]
CdRsKuLL
February 20, 2020, 12:46:45 PM
topic Waggster X-1 BLTouch v1.3
[Pretend Prusa Chitchat]
furious1y
February 16, 2020, 11:02:16 AM
topic Waggster Genius BLTouch v1.4
[Pretend Prusa Chitchat]
CdRsKuLL
February 15, 2020, 05:55:32 AM
topic Waggster X-1 BLTouch v1.4
[Pretend Prusa Chitchat]
CdRsKuLL
February 15, 2020, 05:46:46 AM
topic Wanhao D9 Mk2 Waggster CR10Pro Firmware
[General ChitChat]
CdRsKuLL
February 13, 2020, 05:42:10 PM
topic Waggster X-1 BLTouch v1.2
[Pretend Prusa Chitchat]
lord-of-candy
February 04, 2020, 11:38:23 PM
topic Waggster BLTouch V1.0
[Pretend Prusa Chitchat]
CdRsKuLL
February 03, 2020, 12:32:39 PM
topic Waggster Genius BLTouch v1.3
[Pretend Prusa Chitchat]
CdRsKuLL
February 01, 2020, 05:20:31 AM
topic Waggster Genius BLTouch v1.1
[Pretend Prusa Chitchat]
CdRsKuLL
January 30, 2020, 03:06:04 PM
topic Original Mk2s with SKR v1.3
[Pretend Prusa Hardware]
Kraken 3D
January 29, 2020, 12:57:53 AM
topic Howdy folks
[General ChitChat]
gaz
January 12, 2020, 03:58:15 AM
topic Flashforge Guider II Review .... great printer for 899!
[General ChitChat]
CdRsKuLL
January 02, 2020, 02:39:46 AM
topic Layer shifting?
[Pretend Prusa Chitchat]
gaz
December 31, 2019, 04:01:56 PM
topic Steadytech Mini 3D Printer Review
[General ChitChat]
CdRsKuLL
December 17, 2019, 02:22:48 AM
topic Required Parts to build your own
[Pretend Prusa Hardware]
Parky
November 11, 2019, 09:16:38 AM
topic Wanhao D9 Mk2 Modifications
[General ChitChat]
CdRsKuLL
November 06, 2019, 06:19:41 PM
topic Just saying Hi and Thanks
[General ChitChat]
CdRsKuLL
September 24, 2019, 01:21:20 PM
topic Modified bed settings as you described in your reddit post, Probe is still offse
[Pretend Prusa Firmware]
CdRsKuLL
September 13, 2019, 04:08:23 PM
topic Thank you!
[General ChitChat]
CdRsKuLL
September 02, 2019, 11:33:45 AM
topic No temps no actions from the touchscreen.
[Pretend Prusa Firmware]
Hiatus
June 27, 2019, 04:45:48 PM

* Recent Posts

Re: Wagster mod with octoprint by CdRsKuLL
[February 20, 2020, 12:46:45 PM]


Re: Wagster mod with octoprint by furious1y
[February 18, 2020, 07:32:01 AM]


Re: Waggster X-1 BLTouch v1.3 by furious1y
[February 16, 2020, 11:02:16 AM]


Re: Waggster X-1 BLTouch v1.3 by CdRsKuLL
[February 15, 2020, 06:58:57 PM]


Re: Waggster X-1 BLTouch v1.3 by furious1y
[February 15, 2020, 02:58:26 PM]


Waggster Genius BLTouch v1.4 by CdRsKuLL
[February 15, 2020, 05:55:32 AM]


Waggster X-1 BLTouch v1.4 by CdRsKuLL
[February 15, 2020, 05:46:46 AM]


Re: Waggster X-1 BLTouch v1.3 by CdRsKuLL
[February 15, 2020, 05:44:51 AM]


Re: Waggster X-1 BLTouch v1.3 by furious1y
[February 14, 2020, 04:27:42 PM]


Re: Wanhao D9 Mk2 Waggster CR10Pro Firmware by CdRsKuLL
[February 13, 2020, 05:42:10 PM]


Re: Wagster mod with octoprint by Natedwg
[February 13, 2020, 12:57:49 PM]


Re: Wanhao D9 Mk2 Waggster CR10Pro Firmware by dabuh
[February 13, 2020, 09:44:57 AM]


Re: Wagster mod with octoprint by lord-of-candy
[February 11, 2020, 07:34:36 PM]


Re: Wagster mod with octoprint by Natedwg
[February 11, 2020, 04:53:34 PM]


Re: Wagster mod with octoprint by lord-of-candy
[February 10, 2020, 11:00:25 PM]


Wagster mod with octoprint by Natedwg
[February 10, 2020, 07:12:20 AM]


Re: Waggster X-1 BLTouch v1.3 by ddave47
[February 08, 2020, 12:51:53 AM]


Re: Waggster X-1 BLTouch v1.3 by calingg
[February 07, 2020, 11:25:50 AM]


Re: Waggster X-1 BLTouch v1.2 by lord-of-candy
[February 04, 2020, 11:38:23 PM]


Re: Waggster X-1 BLTouch v1.2 by calingg
[February 03, 2020, 03:58:59 PM]

* Forum Staff

CdRsKuLL admin CdRsKuLL
Administrator

* Top Boards