Author Topic: Wanhao D9 Mk2 Waggster CR10Pro Firmware  (Read 1515 times)

CdRsKuLL

  • Administrator
  • Jr. Member
  • *****
  • Posts: 52
    • View Profile
Re: Wanhao D9 Mk2 Waggster CR10Pro Firmware
« Reply #15 on: October 21, 2019, 03:52:46 AM »
Hi, sorry I had a really busy weekend.  Is your MicroSD card less than 16gb that's really the only thing I can think of?  Generally, you should see things like 0003 and 0002 after the filetypes that appear, then it would flash up all the screens as it copies them over.


MRob

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Wanhao D9 Mk2 Waggster CR10Pro Firmware
« Reply #16 on: October 21, 2019, 05:34:24 AM »
No problem! And less than 16gb? Wasnt aware that was an issue - it is 64gb, but formatted correctly. I'll buy a smaller one and try again. Thanks for the tip.

MRob

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Wanhao D9 Mk2 Waggster CR10Pro Firmware
« Reply #17 on: October 23, 2019, 09:27:17 AM »
OK just tried with an 8bg fat32 formatted microsd and...bummer.... still no good. Oh well, I was thinking of switching to an MKS board anyway!!

CdRsKuLL

  • Administrator
  • Jr. Member
  • *****
  • Posts: 52
    • View Profile
Re: Wanhao D9 Mk2 Waggster CR10Pro Firmware
« Reply #18 on: November 18, 2019, 04:13:05 AM »
NOTICE...

For those having problems flashing the touchscreen you MUST format your MicroSD card correctly.

It HAS to be 16GB or under
You MUST set the Allocation unit size to 4096 bytes

See the attached photo... once you do this it will update fine :-)