Author Topic: can no longer use my printer  (Read 159 times)

CyberInfluencer

  • Newbie
  • *
  • Posts: 1
    • View Profile
can no longer use my printer
« on: April 18, 2020, 11:56:30 AM »
I downloaded this
https://pretendprusa.co.uk/index.php?action=downloads;sa=view;down=18

I have the menus and stuff. The BL-Touch just blinks and cannot lower my z-axis

I also loaded the .hex file via USB using my linux laptop. Now when I connect my linux laptop - I see ttyUSB0 but cannot connect to my printer.

Help would be appreciated. Thanks

CdRsKuLL

  • Administrator
  • Full Member
  • *****
  • Posts: 146
    • View Profile
Re: can no longer use my printer
« Reply #1 on: April 18, 2020, 02:37:38 PM »
If the z axis will not lower then your wiring is wrong. Check the white and black cable and the single wire that connects to the z max and stop.  Try connecting at 250000 also.

Steve